Raspberry Pi X708 Power Management and UPS HAT

Raspberry Pi X708 Power Management and UPS HAT

  • Excellent UPS function such as Power Loss Detection (PLD), Automatic Safe Shutdown (ASD), Auto Power On (AON) etc., DC 5V Max. 8A output;
  • Comes with a cooling fan, no extra cooling solution is needed.
  • HAT (Hardware Attach on Top) size. Separate the battery from the expansion board, which can save a lot of space, which will bring more flexibility.
  • Reserved two kinds of battery port (XH2.54 and PH2.0), supports 3.7V 18650 lithium battery and 3.7V lithium polymer battery, No capacity limit, only request 3.7V lithium battery.
  • Powers the Raspberry Pi via the 40-pin header - no additional cabling required
  • Standard Raspberry Pi extension interface, compatible with other expansion boards
  • DC power jack (5.5*2.5mm) and Type-C socket convenient for power input
  • On-board PH2.0 connector allows connecting external power switch and DIY your perfect case
  • On-board XH2.54 power output connector allows to power other devices
  • Mounting holes and standoffs provide mechanical stability of the Raspberry Pi and X708 assembly
  • Compatible with:
    • Raspberry Pi 4 Model B
    • Raspberry Pi 3 Model A+
    • Raspberry Pi 3 Model B+
    • Raspberry Pi 3 Model B
    • Raspberry Pi 2 Model B
    • Raspberry Pi 1 Model B+
  • Operating System
    • Raspbian Stretch
    • Safe shutdown function tested for Raspbian, other operating systems to be tested and advised
  • Smart and powerful Uninterruptible Power Supply (UPS)
    • Provides continuous operations for up to 10~30 hours (depending on battery type and qty used)
    • Max 5.1V 8000mA Power Backup for even the most demanding RPi setups
    • Supports 2A/3A fast battery charging
    • Integrated overcurrent protection and over-voltage protection
    • Integrated Maxim's fuel-gauge systems (Reading battery voltage and percentage via i2c)
    • Integrated 10-A fully-integrated synchronous boost converter
    • Intelligent automatic charging and discharging
    • Operate in both charge mode and boost mode to allow full system management and battery power mgt
    • Integrated IN-to-SYS pass-through path to pass the input voltage to the system
    • Advanced system power-path management avoids batteries frequent charging and discharging
    • Advanced system power-path management allows 3A fast charging and powering Raspberry Pi at the same time
    • On-board 4 green LEDs indicate battery charging and discharging levels of 25%, 50%, 75%, and 100%
    • Batteries attach via PH2.0-2P or XH2.54-2P
  • Power supply via Type-C socket : 5Vdc ±5%, ≥3A
  • Via DC power jack : 5Vdc ±5%, ≥4A
  • UPS output : 5.1V ±5% Max 8A
  • UPS charging current: 1.8~2.2A / 2.3~3.2A
  • Terminal Battery Voltage : 4.24V
  • Recharge Threshold : 4.1V
  • Battery: 3.7V Lithium Battery